RE-THERM Technology- the effective way to stop condensation

The problem of condensation has been typical, and will remain so, for a large range of different facilities and for widely various materials. The condensate, or "sweating" as it is popularly known in a common speech, does a serious damage to the property of any person, which it is practically impossible to estimate, but it is, undoubtedly, huge. The issue of condensation is actual for all, without exception, areas of activity and at the various objects.

The condensate can form on the surface of all metal structures, bringing corrosion which damages and destroys metallic elements. The condensate can also appear on the surfaces of construction objects (in corners of the rooms, on slopes, on ceilings and so on), leading to their excessive moistening. Such excess water creates the ideal environment for the existence of various fungus microorganisms which cause tens of chronic human diseases, in particular, among children.

Condensation is a result of the difference between temperatures and relatively high air humidity. In other words, condensation occurs when there is a certain object with the temperature quite lower than the temperature of the ambient air.

The main method to prevent condensation is to increase the temperature of the surface when compared to the dewpoint temperature.

Let's look at the warmth-keeping based on RE-THERM liquid heat insulation.
This method is very easy use but at the same time very effective. The coating of RE-THERM is a special paint, containing silicon and ceramic hollow microspheres. Once on the surface, it creates a high-efficient heat insulation layer. The diameter of those microspheres in the RE-THERM structure ranges from 0.01 to 0.05 mm!

innovatsionnyie tehnologii 498x498

The problem of condensation has been typical, and will remain so, for a large range of different facilities and for widely various materials. The condensate, or "sweating" as it is popularly known in a common speech, does a serious damage to the property of any person, which it is practically impossible to estimate, but it is, undoubtedly, huge. The issue of condensation is actual for all, without exception, areas of activity and at the various objects.

The condensate can form on the surface of all metal structures, bringing corrosion which damages and destroys metallic elements. The condensate can also appear on the surfaces of construction objects (in corners of the rooms, on slopes, on ceilings and so on), leading to their excessive moistening. Such excess water creates the ideal environment for the existence of various fungus microorganisms which cause tens of chronic human diseases, in particular, among children.

Condensation is a result of the difference between temperatures and relatively high air humidity. In other words, condensation occurs when there is a certain object with the temperature quite lower than the temperature of the ambient air.

The main method to prevent condensation is to increase the temperature of the surface when compared to the dewpoint temperature.

Let's look at the warmth-keeping based on RE-THERM liquid heat insulation.
This method is very easy use but at the same time very effective. The coating of RE-THERM is a special paint, containing silicon and ceramic hollow microspheres. Once on the surface, it creates a high-efficient heat insulation layer. The diameter of those microspheres in the RE-THERM structure ranges from 0.01 to 0.05 mm!

With that being said, this RE-THERM technology of heat insulation is absolutely seamless and has the ideal adhesion to the processed surface. Therefore, the possibility of the situation when a warm air can penetrate through incompactnesses or micropores of the surface and reach the layer of the heat insulator tends to zero.

Summarizing the above, it follows that RE-THERM is the easiest as well as the most sustaining and eco-friendly method to eliminate causes of occurrence of the condensation!

Ret therm1

For more detailed information about RE-THERM Technology you are welcome to visit the stand of Innovative Technologies Company on September 5-8, in the city of Almaty, Atakent IEC. We are looking forward to see you!

  • Created on .